OBD0 Hondata?

wyocrx · 01-31-2010, 08:34 PM

I have a a6 with the MPFI. I know hondata requires OBD1 but what all would I need to switch to run hondata on my A6?

OBD0 to OBD1 Harness
P28 ECU
3 wire 02 sensor
distributor from z6 or just obd1
I would be using dsm 450's
Knock sensor??

Not sure really want to tune with hondata so please help me out I have researched and its confusing me. Thanks

The_Beave · 01-31-2010, 09:45 PM

You'd use the D15 dizzy from an ODB1 car. The Z6 dizzy is stupid. You can use a P06 ECU without the 3 wire o2 sensor, IIRC. They are cheaper and should be easier to find.

Why the heck do you want to use Hondata? They are a sucky company and there are much better options available. Why are you even swapping to OBD1? TurboEdit is perfectly capable of running almost anythng short of ITBs and very big HP builds.

wyocrx · 02-01-2010, 07:16 PM

I havent been able to find out much about turboedit everyone has been telling me to convert to OBD1. Does turboedit have datalogging? Antilag?

The_Beave · 02-01-2010, 08:21 PM

Datalogging, yes. Better than Crome free, IMO.

Antilag is overated and generally retarded for street vehicles. No, it doesn't have it.

wyocrx · 02-04-2010, 11:36 PM

Ive been researching alot about the turboedit do they make anything anymore? Is it one of those you pull the chip everytime you want to change your tune? If you could give me any info on this turboedit that would be great I just dont get how the turboedit works.

f00ker · 02-05-2010, 12:25 AM

Originally Posted by wyocrx

I have a a6 with the MPFI. I know hondata requires OBD1 but what all would I need to switch to run hondata on my A6?

OBD0 to OBD1 Harness
P28 ECU
3 wire 02 sensor
distributor from z6 or just obd1
I would be using dsm 450's
Knock sensor??

Not sure really want to tune with hondata so please help me out I have researched and its confusing me. Thanks

Are you turbo'd?

If not, wtf are you thinking?

wyocrx · 02-05-2010, 05:49 PM

I have everything to turbo it but my tuning and just a couple small things. But im researching what I want to tune with. Not real sure about the turbo edit Ive been told by the time you get 50 chips burned tuning the turboedit its as cheap as converting to OBD1 and getting neptune which I would like more. Just can find what all to switch just to run OBD1 on my a6. I can find to swap a Y8 or z6 but not for an OBD1 A6

f00ker · 02-05-2010, 08:26 PM

Don't even think about running the 450cc's before turboing.

wyocrx · 02-06-2010, 07:35 PM

I wouldnt its staying stock tuned and everything until I get my turbo kit on.

Foowee · 02-07-2010, 02:32 PM

Are you going to tune it yourself? If you don't mind putting in the time turboedit will not do you wrong.

If you're paying someone else to push buttons for you then turboedit won't help lower your bill. They will have their own personal opinion and preference. Whatever software they are most comfortable with will probably give you the best results...

btw:

01100110011101010110001101101011001000000110100001 10111101101110011001000110000101110100011000010010 00000110000101101110011001000010000001000100011011 11011101010110011100100000011000110110000101101110 00100000011001010110000101110100001000000110000100 10000001100100011010010110001101101011